英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
Toona查看　Toona　在百度字典中的解释百度英翻中〔查看〕
Toona查看　Toona　在Google字典中的解释Google英翻中〔查看〕
Toona查看　Toona　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Rough idle and jerking under 4k rpm - Yamaha FZ1 Motorcycle Forum
    1st the idle starts dropping from 1100 to 800 and when you leave the bike running the idle goes more and more to the 800rpm to where it occasionally jumps to 1100rpm The check engine light isn't on and there is no code not even in di mode
  • Gen 1 FZ1 Running Rough, Ideas Before I Pull Carbs
    I've found that carbureted bikes need the float bowl and the idle mixture passages cleaned about every 5 years Each idle mixture screw should be adjusted 3-3 1 2 turns out from lightly seated (this will lightly enrichen your low end)
  • Yamaha FZ1 Rough Running Below 4500 RPM Issue Explained
    Rough running below 4500 RPM on a Yamaha FZ1 can stem from faulty fuel injectors, clogged air passages, or ignition timing issues Check the throttle position sensor (TPS) and ensure the fuel injectors are clean and delivering proper spray patterns
  • fz1 n idle problems - Yamaha Workshop - Yamaha Owners Club
    HI FOLKS, COULD ANY ONE HELP ME WITH A PROBLEM I HAVE ON MY FZ1 N, WHEN STARTED FROM COLD IT TICKS OVER AS IT SHOUD ON CHOKE AT AROUND 2 RPM THEN AFTER A COUPLE OF MINS IT REVS TO 3500 RPM AND STAYS THERE, BEFORE I PUT IT AWAY FOR WINTER IN SEPTEMBER I HAD NO PROBLEM WITH IT AT ALL BUT I START IT UP EVERY 3 WEEKS OR SO AND THATS HOW I NOTICED TH
  • How to Fix High Idle on Motorcycle Yamaha: Essential Steps . . .
    Struggling with high idle issues on your Yamaha motorcycle? This article offers a comprehensive guide to diagnose and fix the problem hassle-free Discover essential tools, step-by-step instructions on inspecting the throttle cable, checking for vacuum leaks, and adjusting the idle speed
  • The issue of idle hanging high or being so low it stalls. . .
    In my case the "air leak" was inside the carburator, there was a lean condition at idle that was causing the hanging revs, then when turned down it stalled, when turned up the slides lifted and it revved even higher
  • New member Rough Idle need HELP - Yamaha FZ1 Motorcycle Forum
    That lopping idle can definitely indicate a vacuum leak regardless of what the dealer said You could easily check around the throttle bodies by spraying some starter fluid or carb cleaner around them while the bike is up to temp and idling





中文字典-英文字典  2005-2009