英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字,中文词皆可:


请选择你想看的字典辞典:
单词字典翻译
hydroxides查看 hydroxides 在百度字典中的解释百度英翻中〔查看〕
hydroxides查看 hydroxides 在Google字典中的解释Google英翻中〔查看〕
hydroxides查看 hydroxides 在Yahoo字典中的解释Yahoo英翻中〔查看〕





安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Platform Cross Bracing - ControlBooth
    That would, in my opinion, probably be strong enough not to cross brace, but I would build it, then get up on it and see how it moved and only then make a final determination Of course this also assumes that the platform framing is strong enough to handle an 8' span and that the person who welded everything knew what they were doing
  • Roof diagonal cross bracing | DIYnot Forums
    The guide suggests that a 25mm gap should be left above the longitudinal braces so there is room to fit this diagonal brace Does this mean I need to move down the longitudinal brace to allow room or would me fitting the diagonal bracing like suggested in my image, 'My Roof jpeg' be sufficient?
  • Legging Tall Platforms - ControlBooth
    Then I would cross brace from wall to wall and brace the sides of each individual stud wall BillConnerFASTC Well-Known Member May 4, 2016 #7 I th
  • Advice for repositioning removing cross bracing please
    The cross braces sit on top of the vertical supports but are not fixed to it - they are nailed at each end to rafters The rafters are nailed to the vertical supports but those supports are not laterally braced The flooring joists appear to run the full width of the roof, laterally bracing the rafters
  • Building long unsupported spans - ControlBooth
    He wants to accomplish this by putting a 4x4 post in each corner, and cross-bracing the 4' sides, but that's pretty much the extent of the reinforcement He wants to frame it out of 2x6 and space toggles every 12" Is there any safe way to accomplish this? I can't imagine that there would be Are there accepted industry standards for building long, unsupported spans out of wood?
  • Bracing on Trusses | DIYnot Forums
    Did you cross brace yours? Did you use the splice as suggested in the diagram? I looked but couldn't find a 600mm splice anyway, only 300mm! Were building control okay with yours? I can take the second braces out no problem, but now they're in i'm thinking of just leaving them Truss company sent enough wood
  • Loft Options - opinions please | DIYnot Forums
    As 1, but cross-brace (i have some 63mm x 38mm timber already) to create air gap Replace 70mm wool with 70mm insulation board between joists to double the R value, and board over As 3, but also using cross-bracing to create air gap
  • My platform system - ControlBooth
    This is to create cross bracing to prevent rocking the long way on the platform down the road I use 1 4 inch luan You could also use 1 8 inch luan, or even Masonite It doesn't have to be thick at all It's simply fixing the distance on the surrounding 2X4's so they can't rock
  • Strengthening Loft floor | DIYnot Forums
    The cheapest way to strengthen a loft floor is cross bracing, not gluing and screwing new 4*2 on top of existing joists, that just add dead weight to existing joists, and if they are 3*2 that will make things worse Tony1851 would be better off adding 6*2 from wall plate to supporting wall on a 3 5m to 4m span, with noggins in between
  • Remove purlin cross braces? | DIYnot Forums
    Hi, I'm in need of some expert advice I'm flooring my loft just for storage purposes and, if it's possible, would like to remove those cross braces (I'm not sure of the correct terminology) that run across the loft between the two purlins I remember the builder who did our bathroom a few





中文字典-英文字典  2005-2009