英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • fusion 360 to Cura wrong dimensions
    I made an object on fusion 360 the dimensions are 120mm long 9mm on one end and 18mm on the other end a cylinder object when I export to Cura slicer my dimensions are wrong I keep getting 35mm x 35mm x 120mm only one dimension is correct I added the barbarian add-on still no luck
  • How can I send multiple bodies to my 3D printer Software (Cura . . .
    If you wish to add more parts, leave Cura open (using single instance) and repeat steps 2 and 3 Note: In either application, parts will be exported to the same location in both slicers, so be sure to move your parts around to locate and reveal all expected parts present in the slicer app or on the virtual build platform!
  • Stl datei hat plötzlich in Cura Löcher und zu dünner Wandaufbau. . . .
    Der Slicer kann nicht dicker drucken als das Teil dick ist Wenn die Wand nur 0,5 mm dick ist, müsste im Cura Slicer die "Dicke der Wandlinien" auf 0,25 mm gesetzt werden, damit zwei Linien gedruckt werden können Bei 0,4 mm Druckbreite müssen dann die Wände also mindestens 0,8 mm dick sein Wenn du Probleme hast, die Wände in Fusion zu verdicken, kannst du die Fusion Datei ja mal hochladen
  • Exported STL file missing surfaces in cura.
    ‎ 02-22-2022 04:15 PM When importing the model in Fusion360, or opening in 3D paint, I see the full model without any gaps and all the surfaces That tells me that the model is correctly exported and something is going on with the cura slicer Thanks for the help
  • Incorrect Scaling when Export OBJ - Autodesk Community
    I'm trying to export from F360, as I've done for the last 3 years, and today, all of a sudden, it's scaling my projects down to what appears to be a fraction of the size I have a piece that's approx 2 inch by 2 inch in F360 I extrude it 18mm, and when I export it and open it in Slicer app (Cura)
  • Export Multi-body component to Slicer (Cura) *aligned*
    Cura offers little support for me to position them I know it's possible that this is a problem with Slicer (Cura), but just wondering if anyone has tips to make this easier
  • Solved: Threadnot appearing in Cura - Autodesk Community
    I made one easily enough but when I open the 3D print test in Cura, (my slicing software of choice,) the thread has not actually been modeled!? I've looked at the part thumbnail in my browser and it shows the thread there, so although obviously inventor doesn't actually model it, and just shows a visual representation of it, it is shown outside
  • question about units scale in STL export - Autodesk Community
    A while ago a question was generated about design in inches, then converting to MM for sending STL file to slicer Just tried this by making a 1"x1"x0 250" rectangle with a hole center threaded to 1 2x13 Then converting drawing to MM, generating a STL file and sending it to CURA slicer for 3D printing My result was a rectangle with just about the correct X, Y, Z dimensions (within ~2 ths
  • Detailed REVIT model to 3D print file
    I have used Cura, Slicer, and several other slicing software I finally succeeded in getting the foundation to print smoothly with the Makerbot 5th Gen However, on all the printers the walls are poor quality If printed at a small scale, with thin walls, the model prints O K
  • Export Multi-body component to Slicer(Cura) *aligned*
    Export Multi-body component to Slicer (Cura) *aligned* Hello all, Often I work on models have sections of the same body that needs to be stronger (e g around screw hole) and my slicer software (Cura) allow setting different infill levels of different objects in the same print





中文字典-英文字典  2005-2009